Chapter 10
10 - 3
6
Press Mono Start or Colour Start.
The machine polls each number or
group in turn for a document.
Note
To cancel all sequential polling receive jobs,
press Menu/Set, 2, 6. (See Checking job
status and cancelling a waiting job on page
5-8.)
To stop Sequential Polling in progress
1
Press Menu/Set, 2, 6.
The LCD will display the name, if you
stored it, or the fax number being
dialled.
2
Press Menu/Set.
The LCD will display:
3
Press 1 to Clear.
The LCD will then display the sequential
polling job number and
1.Clear
2.Exit
.
4
To cancel the sequential polling, press
1.
5
Press Stop/Exit.
Polled Transmit
Polled Transmit is when you set up your
machine to wait with a document so another
fax machine can call and retrieve it.
Setup for Polled Transmit
(Standard) (Monochrome
only)
1
If it is not illuminated in blue, press
(Fax).
2
Load your document.
3
Press Menu/Set, 2, 2, 6.
4
Press ▲ or ▼ to select Standard.
Press Menu/Set.
5
Press 2 and press Mono Start.
Note
■ The document will be stored and can be
retrieved from any other fax machine until
you delete the fax from memory by using
the Cancelling a Job menu setting. (See
Checking job status and cancelling a
waiting job on page 5-8.)
■ Once a document has been stored in the
memory for polling transmit, it can be sent
and received more than once.
XXXXXXXX
1.Clear 2.Exit
Setup Send
6.Polled TX
Next
1.Yes 2.No
To Next Page
Loading...
