Brother MFC-9420CN - Enlarging or Reducing the Image Copied

Chapter 11
11 - 4
Enlarging or reducing the
image copied
You can select the following enlargement or
reduction ratios.
Custom(25-400%) allows you to enter a
ratio from 25% to 400%.
1
Press (Copy) to illuminate it in
blue.
2
Load your document.
3
Press Enlarge/Reduce.
4
Press ▲ or ▼ to select the enlargement
or reduction ratio you want.
Press Menu/Set.
—OR—
Use the dial pad to enter an
enlargement or reduction ratio from
25%
to
400%.
Press Menu/Set.
(For example, press 5 3 to enter
53%.)
5
Press Mono Start or Colour Start.
—OR—
Press the Options key for more
settings.
Note
■ Page Layout Options 2 in 1 (P),
2 in 1 (L), 4 in 1 (P), 4 in 1 (L)
or
Poster(3 x 3) are not available with
Enlarge/Reduce.
■ After you choose your settings by pressing
Menu/Set, the LCD shows
Set temporarily.
Press
Enlarge/Reduce
100%
104% EXE→ LTR
141% A5→ A4
200%
Custom(25-400%)
50%
70%
78% LGL→ LTR
83% LGL→ A4
85% LTR→ EXE
91% Full Page
94% A4→ LTR
97% LTR→ A4