Brother MFC-9420CN - Making N in 1 Copies or a Poster

Making copies
11 - 5
11
Making N in 1 copies or a
poster (Page Layout)
You can reduce the amount of copies by
using the N in 1 copy feature. This allows you
to copy two or four pages onto one page,
allowing you to save paper. It is also possible
to create a poster. When you use the Poster
feature your machine divides your document
into sections, then enlarges the sections so
you can assemble them into a poster. If you
want to print a poster, use the scanner glass.
Note
■ Please make sure paper size is set to A4
or
Letter.
■ You can use N in 1 copy and poster
feature with 100% copy size only.
■ (P) means Portrait and (L) means
Landscape.
■ For Poster copies, you cannot make more
than one copy.
1
Press (Copy) to illuminate it in
blue.
2
Load your document.
3
Use the dial pad to enter the number of
copies you want (up to 99).
4
Press Options and ▲ or ▼ to select
Page Layout.
Press Menu/Set.
5
Press ▲ or ▼ to select 2 in 1 (P),
2 in 1 (L), 4 in 1 (P),
4 in 1 (L), Poster(3 x 3) or
Off(1 in 1).
Press Menu/Set.
6
Press Mono Start or Colour Start to
scan the document.
If you are making a poster or placed the
document in the ADF, the machine
scans the document and starts printing.
If you are using the scanner glass:
7
After the machine scans the page,
the LCD shows:
Press 1 to scan the next page.
8
Place the next page on the scanner
glass. The LCD shows:
Press Menu/Set.
9
Repeat Steps 7 and 8 for each page of
the layout.
0
After all the pages of the document have
been scanned, press 2 in Step 7 to end.
Next Page?
1.Yes 2.No
Set Next Page
Then Press Set