Brother MFC-9420CN - Copy Options Key

Menu and Features
B - 14
B
Copy options key
Use the Options key to quickly set the following copy settings temporarily for the next copy. After
you choose your setting by pressing Menu/Set, the LCD shows
Set temporarily. Press Mono
Start or Colour Start when you have finished choosing settings.
*
XXX is the paper size detected by the tray or the small paper size you set in Menu/Set, 1, 3.
Note
■ If both trays are using paper that is the same size, Auto will allow your machine to take paper
from Tray#2 if Tray#1 is out of paper.
■ The factory settings are shown in Bold.
Press Menu Selections Options Page
Quality Auto
Text
Photo
11-3
Stack/Sort Stack
Sort
11-7
Brightness ▼ -+ ▲
▼ -+ ▲
▼ -+ ▲
▼ -+ ▲
▼ -+ ▲
11-7
Contrast ▼ -+ ▲
▼ -+ ▲
▼ -+ ▲
▼ -+ ▲
▼ -+ ▲
11-8
Page Layout Off(1 in 1)
2 in 1 (P)
2 in 1 (L)
4 in 1 (P)
4 in 1 (L)
Poster(3 x 3)
11-5
Tray Select
(
This menu only appears when you have
the optional tray#2.
)
Auto
#1 (XXX)
*
#2 (XXX)
*
11-2
select select