Brother MFC-9420CN - Document Jams

Troubleshooting and routine maintenance
C - 5
C
Document jams
If the document is jammed, follow the steps
below.
Document is jammed in the top of the
ADF unit
1 Take out any paper from the ADF that is
not jammed.
2
Open the ADF cover.
3
Pull the jammed document out to the
left.
4
Close the ADF cover.
Press Stop/Exit.
Note
To avoid future document jams close the ADF
cover properly by pushing it gently in the
centre.
Document is jammed inside the ADF
unit
1
Take out any paper from the ADF that is
not jammed.
2
Lift the document cover.
3 Pull the jammed document out to the
right.
4
Close the document cover.
5
Press Stop/Exit.
Document is jammed at the output
tray
1
Pull the jammed document out to the
right.
2
Press Stop/Exit.