Chapter 5
5 - 8
Delayed Batch Transmission
(Monochrome only)
Before sending the delayed faxes, your
machine will help you economize by sorting
all the faxes in the memory by destination and
scheduled time. All delayed faxes that are
scheduled to be sent at the same time to the
same fax number will be sent as one fax to
save transmission time.
1
If it is not illuminated in blue, press
(Fax).
2
Press Menu/Set, 2, 2, 4.
3
Press ▲ or ▼ to select On (or Off).
Press Menu/Set.
4
Press Stop/Exit.
Checking job status and
cancelling a waiting job
Check which jobs are still waiting in the
memory to be sent. (If there are no jobs, the
LCD shows
No Jobs Waiting.) You can
cancel a fax job that is stored and waiting in
the memory.
1 Press Menu/Set, 2, 6.
2
If you have more than one job waiting,
press
▲ or ▼ to select the job you want
to cancel.
Press Menu/Set.
—OR—
If you only have one job waiting, go to
Step 3.
3
Press 1 to cancel.
To cancel another job waiting, go to
Step 2.
—OR—
Press 2 to exit without cancelling.
4
Press Stop/Exit.
Setup Send
4.Batch TX
Fax
6.Remaining Jobs
To Next Page
Loading...
