Troubleshooting and routine maintenance
C - 41
C
Checking remaining life of
parts
You can view the remaining life of these parts
on the LCD.
1 Press Menu/Set, 7, 3.
2
Press ▲ or ▼ to select
1.OPC Belt Life, 2.Fuser Life,
3.120K Kit Life or
4.PF KIT2 Life.
Press Menu/Set.
3
Press Stop/Exit.
Note
The life check of a part will be accurate only if
you have reset that part’s life counter when
you installed a new part.
It will not be accurate if you have reset that
part’s life counter during the life of a used
part.
Packing and shipping
the machine
When you transport the machine, use the
packing materials that came with your
machine. If you do not pack the machine
properly, you could void your warranty. The
machine should be adequately insured with
the carrier.
1
Turn off the machine’s power switch.
2
Unplug first the telephone line cord from
the telephone socket, then any interface
cables, and then unplug the power cord
from the electrical socket.
3
Open the scanner unit and the inside
cover of the machine so that it latches
under the scanner unit.
4
Push both green OPC belt cartridge lock
levers inwards.
Machine Info.
3.Parts Life
OPC Belt Life
Remaining:XXX%
To Next Page
Loading...
