Important information
A - 2
A
LAN connection
International E
NERGY
S
TAR
®
Compliance Statement
The purpose of the International E
NERGY
S
TAR
®
Program is to promote the development and
popularization of energy-efficient office equipment.
As an E
NERGY
S
TAR
®
Partner, Brother Industries,
Ltd. has determined that this product meets the
E
NERGY
S
TAR
®
guidelines for energy efficiency.
Radio interference (220-240V
Model only)
This product complies with EN55022 (CISPR
Publication 22)/Class B. When connecting the
machine to a computer, ensure that you use the
following interface cables.
1.A shielded parallel interface cable with
twisted-pair conductors and that is marked
“IEEE 1284 compliant”. The cable must not
exceed 2.0 metres in length.
2.A USB cable which must not exceed 2.0 metres
in length.
Important Information
for Australia
IMPORTANT-For Your Safety
To ensure safe operation the three-pin plug
supplied must be inserted only into a standard
three-pin power point which is effectively grounded
through the normal household wiring.
Extension cords used with the equipment must be
three-conductor and be correctly wired to provide
connection to ground. Incorrectly wired extension
cords are a major cause of fatalities.
The fact that the equipment operates satisfactorily
does not imply that the power is grounded and that
the installation is completely safe. For your safety,
if in any doubt about the effective grounding of the
power, consult a qualified electrician.
International E
NERGY
S
TAR
®
Compliance Statement
The purpose of the International E
NERGY
S
TAR
®
Program is to promote the development and
popularization of energy-efficient office equipment.
As an E
NERGY
S
TAR
®
Partner, Brother Industries,
Ltd. has determined that this product meets the
E
NERGY
S
TAR
®
guidelines for energy efficiency.
CAUTION
Do not connect this product to a LAN
connection that is subject to over-voltages.
To Next Page
Loading...
