Brother MFC-9420CN - Page 119

Menu and Features
B - 10
B
6. LAN 1. Setup
TCP/IP
1. BOOT Method Auto
Static
RARP
BOOTP
DHCP
You can choose the
BOOT method that best
suits your needs.
See
Network
User’s
Guide
on the
CD-ROM
2. IP Address [000-255].
[000-255].
[000-255].
[000-255]
Enter the IP address.
3. Subnet Mask [000-255].
[000-255].
[000-255].
[000-255]
Enter the Subnet mask.
4. Gateway [000-255].
[000-255].
[000-255].
[000-255]
Enter the Gateway
address.
5. Node Name BRN_XXXXXX Enter the Node name.
6. WINS Config Auto
Static
You can choose the WINS
configuration mode.
7. WINS Server (Primary)
[000-255].
[000-255].
[000-255].
[000-255]
(Secondary)
[000-255].
[000-255].
[000-255].
[000-255]
Specifies the IP address of
the primary or secondary
WINS server.
8. DNS Server (Primary)
[000-255].
[000-255].
[000-255].
[000-255]
(Secondary)
[000-255].
[000-255].
[000-255].
[000-255]
Specifies the IP address of
the primary or secondary
DNS server.
9. APIPA On
Off
Automatically allocates
the IP address from the
link-local address range.
Main Menu Submenu Menu Selections Options Descriptions Page
Note
The factory settings are shown in Bold.
to exitSelect & Set Select & Set to accept