Chapter 5
5 - 10
5
Press ▲ or ▼ to select one of the
standard or your own comments.
Press Menu/Set.
6
Enter two digits to show the number of
pages you are sending.
Press Menu/Set.
(For example, press 0 2 for 2 pages or
enter 0 0 to leave the number of pages
blank. If you make a mistake, press
to back up and re-enter the number of
pages.)
Send a cover page for all faxes
If you have not yet set your Station ID this
feature will not work. Make sure you have
programmed the Station ID before
continuing. (See Station ID on page 3-2.)
You can set the machine to send a cover
page whenever you send a monochrome fax.
The number of pages in your fax is not
included when you use this setting.
1
If it is not illuminated in blue, press
(Fax).
2
Press Menu/Set, 2, 2, 7.
3
Press ▲ or ▼ to select On (or Off).
Press Menu/Set.
4
If you selected On, press ▲ or ▼ to
select one of the standard or your own
comments.
Press Menu/Set.
Using a printed cover page
If you prefer to use a printed cover page that
you can write on, you can print the sample
page and attach it to your fax.
1 If it is not illuminated in blue, press
(Fax).
2 Press Menu/Set, 2, 2, 7.
3
Press ▲ or ▼ to select Print Sample.
Press Menu/Set.
4
Press Mono Start or Colour Start. Your
machine prints a copy of your cover
page.
▲
Setup Send
7.Coverpg Setup
Setup Send
7.Coverpg Setup
To Next Page
Loading...
