Brother MFC-L2700D Service Manual

2-61
Confidential
4.2.6 Paper is curled
4.2.7 Duplex printing is not possible
<User Check>
• Check that the paper specified in driver settings is matched to the paper set.
• Select "Reduce Paper Curl" in the driver.
• Check that the paper is set in paper tray correctly.
• Print while the green envelope levers are lowered.
Step Cause Remedy
1
Fuser unit failure Replace the fuser unit.
2
Main PCB failure Replace the main PCB ASSY.
<User Check>
• Close the back cover correctly.
• Set the duplex tray correctly.
• Set the driver setting to duplex printing.
• Use A4 or Letter paper specified by the manufacturer.
Step Cause Remedy
1
Eject actuator coming off Reattach the eject actuator.
2
Back cover failure Replace the back cover.
3
Back cover/duplex tray sensor
or eject sensor failure
Replace the eject sensor PCB ASSY.
4
Duplex tray failure Replace the duplex tray.
5
Main PCB failure Replace the main PCB ASSY.
6
Damaged gears in the ejecting
system
Replace the main frame L ASSY.

Brother MFC-L2700D Specifications

General

Print Technology	Laser
Print Resolution	Up to 2400 x 600 dpi
Duplex Printing	Yes
Paper Input Capacity	250 sheets
Monthly Duty Cycle	Up to 10, 000 pages
Functions	Print, Copy, Scan, Fax
ADF Capacity	35 sheets
Memory	32 MB
Fax Speed	33.6 Kbps
Print Speed	Up to 27 ppm
Connectivity	USB 2.0
Scanner Type	Flatbed
Copy Speed	Up to 27 cpm
Scan Resolution	Up to 600 x 2400 dpi
Display	2-line LCD