18
HYPERION User Manual Bruker Optik GmbH
Installation 2
2.7.3 Connecting the joystick
➣ Attention: Before connecting the joystick cable, make sure that the PC is switched
off. If the PC is switched on, connecting the joystick can cause unintentional stage
movements!
2.7.4 Connecting the video camera
1
Connect the 15-pole D-sub connector
①
of the joystick cable to the corresponding
male socket
② at the PC.
1
Connect the video signal cable
① of the
video camera to the S-VHS socket
② of
the converter box.
Connect the USB cable
③ of the con-
verter box to an USB port
④ at the PC.