Bruker HYPERION - Condenser

36
HYPERION User Manual Bruker Optik GmbH
Overview 3
3.6 Condenser
☞ For detailed information about how to adjust the condenser, see section 4.6.
Figure 3.9: Condenser (upper image: left side view, lower image: right side view)
D
A
C
D’
C’
B
Fig. 3.9 Component and Explanation
A Pinhole aperture for adjusting the condenser
Note: The condenser is adjusted exclusively in the transmission mode.
B Condenser
C and C’ Condenser focussing knob: to raise or lower the condenser in relation
to the sample or sample stage in order to maximize the beam intensity in
transmittance mode.
D and D’ Centering screws: to center the condenser by moving it in x- and/or y-
direction.