2-2 2002 Buell S3T: Chassis
HOME
TORQUE VALUES
ITEM TORQUE NOTES
Brake Bleeder Valve 3-5 ft-lbs 4-7 Nm
Clutch Cable, Primary Cover
Fitting
3-9 ft-lbs 4-12 Nm
turn clockwise to install
Clutch Clamp Screw 30-33
in-lbs
3-4 Nm metric
Drive Support Nut 30-35 ft-lbs 41-47 Nm
Exhaust Header Nuts 6-8 ft-lbs 8-11 Nm
Footrest Bolts 24-30 ft-lbs 33-41 Nm must be tight, but not binding
Footrest Mount Bolts 10-15 ft-lbs 14-20 Nm LOCTITE THREADLOCKER 272 (red)
Front Axle Nut 48-53 ft-lbs 65-72 Nm LOCTITE THREADLOCKER 243 (blue), metric
Front Axle Pinch Screw 13-15 ft-lbs 18-20 Nm metric
Front Brake Caliper Half
Screws
14.5-18 ft-lbs 20-24 Nm
metric
Front Brake Line Clamp Screw 30-35
in-lbs
3-4 Nm
Front Brake Master Cylinder
Clamp Screw
80-90
in-lbs
9-10 Nm
Front Brake Rotor Mounting
Screws
20-22 ft-lbs 27-30 Nm
LOCTITE THREADLOCKER 243 (blue)
Front Caliper Banjo Bolt 16-20 ft-lbs 22-27 Nm
Front Caliper Bleeder
Valve
3-5 ft-lbs 4-7 Nm
metric
Front Caliper Pad Hanger Pin 11-14.5 ft-lbs 15-20 Nm metric
Front Caliper Mounting Bolt 22-25 ft-lbs 30-34 Nm LOCTITE THREADLOCKER 272 (red)
Front Fairing Mount Bolts 22-25 ft-lbs 30-34 Nm
Front Fender Lower
Mounting Screws
10-15
in-lbs
1-2 Nm
metric
Front Fender Upper
Mounting Screws
20-25
in-lbs
2-3 Nm
Front Fork Damper Bolt 18-23 ft-lbs 24-31 Nm metric
Front Fork Triple Clamp
Screw (Large)
18-20 ft-lbs 24-27 Nm
LOCTITE ANTI-SEIZE
Front Fork Triple Clamp
Screw (Small)
12-15 ft-lbs 16-20 Nm
LOCTITE ANTI-SEIZE
Front Master Cylinder
Banjo Bolt
16-20 ft-lbs 22-27 Nm
metric
Front Master Cylinder
Cover Screws
9-13
in-lbs
1-2 Nm
Front Shock Mounting Bolt 40-45 ft-lbs 54-61 Nm metric
Fuel Tank Mounting Bolt 18-23 ft-lbs,
then wait 5
minutes and
retighten.
24-31 Nm,
then wait 5
minutes and
retighten.
Special procedure.
Handlebar Clamp Screw 10-12 ft-lbs 14-16 Nm tighten front screws first
To Next Page
Loading...
