BW Technologies MicroDock II - Introduction

1
MicroDock II
Introduction
a Warning
To ensure personal safety, read the Safety Information before
using the MicroDock II Base Station.
The MicroDock II Automatic Test and Calibration Station (“the base sta-
tion”) provides automated calibration and bump testing for
• GasAlertClip Extreme,
• GasAlert Extreme,
•GasAlertMicro,
• GasAlertMicro 5,
• GasAlertMicro 5 PID,
• GasAlertMicro 5 IR,
• GasAlertMicroClip,
• GasAlertMax XT, and
• GasAlertQuattro detectors.
The base station also provides data transfer for
• GasAlert Extreme,
• GasAlertMicroClip,
• GasAlertMax XT, and
• GasAlertQuattro detectors.
A maximum of 8 modules can be connected to the base station.
Note
A maximum of six charging plus two non-charging modules
can be connected to the base station.
Refer to Charging the Battery Pack (Excluding GasAlert Extreme and
GasAlertClip Extreme).