5
MicroDock II
Getting Started
Getting Started
Confirm that the items listed below are included with the base station. If
the base station is damaged or parts are missing, contact the place of
purchase immediately.
• Batteries (four replaceable C-cell alkaline batteries)
• 128 MB Delkin MultiMediaCard (MMC) inserted
• USB cable
• Two to four calibration gas hoses (depending upon order at the
time of purchase) with quick connect fittings
• Inlet filter assembly
• Power adapter
• Charger adapter (charger models only)
• CD: MicroDock II User Manual and MicroDock II Quick Refer-
ence Guide translations
• MicroDock II Quick Reference Guide
• Fleet Manager II CD ROM
Note
A standard MicroDock II base station is shipped with two inlets.
A maximum of four calibration gas inlets can be included if
specified by the user before purchasing.
To order replacement parts, refer to Replacement Parts and Accesso-
ries.
For information regarding the operations and functions of the base sta-
tion, refer to the following figures and tables.
• Figure 1. MicroDock II Base Station and Docking Modules
• Figure 2. and Table 2. The MicroDock II Base Station and Dock-
ing Module
(describes the base station)
• Table 3. Display Elements
(describes the base station LCD icons)
• Table 4. Docking Module Pushbuttons
• Figure 3. and Table 5. Base Station Pushbuttons
• Figure 4. and Table 6. Base Station Connections
To Next Page
Loading...
