79
MicroDock II
Maintenance
Maintenance
a Warning
No user-serviceable parts inside.
To maintain the base station in good operating condition, perform the fol-
lowing basic maintenance as required.
• To ensure quality product operation, maintain a log of all mainte-
nance that is performed.
• Clean the exterior with a soft, damp cloth. Do not use solvents,
soaps, or polishes.
• Confirm that the inlet filter is free of dirt and replace it if required.
To order replacement parts, refer to Replacement Parts and
Accessories.
• Do not immerse the base station in liquids.
Battery Pack Storage
GasAlertMicro and GasAlertMicro 5/PID/IR
When storing for extended periods of time, ensure that the detector is
fully charged and recharged every 30 days.
GasAlertMicroClip
If the GasAlertMicroClip will be stored for an extended period of time,
ensure the detector is fully charged before storage and then recharged
every 30 days. Calibration due dates may be lost if the detector is not
recharged every 30 days.
To Next Page
Loading...
