BW Technologies MicroDock II - Gas Type; Inlets 2-5 - Available Gas Types

41
MicroDock II
User Options Menu
Continue to press C to access the inlet 3, 4, and 5 screens.
O
2
displays as the default gas type when each of the inlet
screens are accessed for the first time.
The inlet screens (2-5) have three options to modify:
• Gas Type
• Gas Concentration Level
• Gas Cylinder Lot # Field (field initially displays blank until
data is entered).
There are two types of screens:
• Single gas
• Multi-gas Type Screen
4. To select a gas type, proceed to Gas Type
. Refer to Table 17. for
available gas types.
Gas Type
There are 33 gas types to select from. Refer to the following table.
Table 18. Inlets 2-5 – Available Gas Types
Gas Type Gas Concentration
Note
*
indicates that the gas concentration level can be
modified on the base station.
Purge (ambient air) %
O
2
(oxygen)
%
NH
3
(ammonia)
ppm *
CO (carbon monoxide) ppm *
ETO (ethylene oxide) ppm *
H
2
(hydrogen)
ppm *