Step Work Description
Connect the power cord to the power
outlet and the copier, and switch the
copier ON.
11 • Press the +, Clear/Stop, and other keys to make sure
that the copy count is correctly indicated
(PC420/430/FC220).
• Check that ‘1’ goes ON on the display
(PC420/430/FC220).
• Check that ‘1’ goes ON on the display
(PC420/430/FC220).
• Check the Main indicator goes ON (PC400/FC200).
• Check the movement of the copy density lever/dial.
Set the Test Sheet on the copyboard,
and make copies; make sure that
copies are made properly.
12 • Make sure no abnormal noise is heard.
• Make sure that copies are made in the specified
number properly (PC420/430/FC220).
• Check that ‘P’ is indicated when the Copy Start key is
pressed without setting copy paper
(PC420/430/FC220).
Clean the exterior of the copier and the
area around it.
13
To Next Page
Loading...
