Values for the Media Registration
Settings front side What to enter
Skew The image is rotated in mm (inches).
Adjustment > 0:
• The image is rotated clockwise.
• The distance between the leading edge of
the sheet and the circle at the top-left corner
is increased.
• The distance between the leading edge of
the sheet and the circle at the bottom-left
corner is decreased.
Adjustment < 0:
• The image is rotated counter-clockwise.
• The distance between the leading edge of
the sheet and the circle at the top-left corner
is decreased.
• The distance between the leading edge of
the sheet and the circle at the bottom-left
corner is increased.
Settings back side What to enter
Skew The image is rotated in mm (inches).
Adjustment > 0:
• The image is rotated clockwise.
• The distance between the leading edge of
the sheet and the dot at the top-left corner is
increased.
• The distance between the leading edge of
the sheet and the dot at the bottom-left cor-
ner is decreased.
Adjustment < 0:
• The image is rotated counter-clockwise.
• The distance between the leading edge of
the sheet and the dot at the top-left corner is
decreased.
• The distance between the leading edge of
the sheet and the dot at the bottom-left cor-
ner is increased.
Ranges
Setting
Range (mm) Range (inches)
Skew -2.5 to +2.5 -0.098 to +0.098
Front-to-Back Side Registration
Introduction
When the front-to-back side registration is not satisfactory:
• Correct the front side registration.
Values for the Media Registration
Chapter 5 - Media Handling
111
Canon varioPRINT 135 Series
To Next Page
Loading...
