Scan to Email
Procedure
1.
Place the originals face up into the automatic document feeder (ADF), or place one original face
down on the glass plate.
2.
On the control panel, touch [Jobs] -> [Copy/Scan].
3.
Select a scan profile.
The job window opens.
NOTE
The system administrator can create scan profiles in addition to the factory default profiles (see
Use the Scan Profiles File (sjt.csv)
on page 255).
4.
Select email as [Destination].
5.
Change the settings for the original and the file.
6.
If applicable, change the subject at [Email subject].
A keyboard appears to enter the subject.
7.
At [Email address] enter an email address or user ID.
You can enter more email addresses when you configured this option in the Settings Editor (see
Configure the Settings for Scan to Email
on page 252). Separate the email addresses with a ';'.
When you entered a user ID, the corresponding email address is displayed. You must configure
the connection between the ID and email address (see
Configure the Settings for the LDAP Server
on page 253 and
Use the Address List File (ral.csv)
on page 254).
8.
Touch [Start] .
The scanner scans the originals. The system sends the resulting file to the entered email address
or email addresses.
Scan to Email
270
Chapter 8 - Carry Out Scan Jobs
Canon varioPRINT 135 Series
To Next Page
Loading...
