Canon varioPRINT 110 - Change the Print Job Settings on the Control Panel; Change the Output Settings; Change Two-Sided into One-Sided and Vice Versa

Change the Print Job Settings on the Control Panel
Change the [Output] Settings
Change Two-Sided into One-Sided and Vice Versa
Introduction
Jobs for which [1-sided] or [2-sided] printing was defined, will be printed on either one side or
both sides of a sheet. If required, you can change this setting.
NOTE
You cannot change this setting for the active print job
.
Procedure
1.
On the control panel, touch [Jobs] -> [Queues] -> [Scheduled jobs] or [Waiting jobs], or select a
DocBox.
2.
Touch the job you want to change.
3.
Touch [Properties], or double-tap the job to open the [Properties] window.
4.
Touch the [1- or 2-sided] button.
5.
Touch the desired value.
6.
Press [OK].
Change the Print Job Settings on the Control Panel
Chapter 6 - Carry Out Print Jobs
161
Canon varioPRINT 135 Series