Canon varioPRINT 110 - Access Other Functions During a Copy Job or Scan Job

Access Other Functions During a Copy Job or Scan Job
Introduction
When you access the copy function or scan function from the [Copy/Scan] view, the job window
opens in full screen mode. Therefore, the buttons that give access to the other system functions
are not visible. However, you can access the other functions while you define the settings for
your copy job or scan job.
NOTE
The machine will remember all the job settings you already defined.
Procedure
1.
In the job window on the control panel, touch [Minimize].
The [Copy/Scan] view appears. The navigation buttons at the bottom of the control panel become
visible and accessible.
2.
Carry out the desired actions.
3.
To get back to your job window, touch [Jobs].
4.
Press [Resume job].
Access Other Functions During a Copy Job or Scan Job
Chapter 7 - Carry Out Copy Jobs
217
Canon varioPRINT 135 Series