Exchange All Setups Between Printers
Introduction
If you have more than one printer, you can exchange the transaction setups between the printers,
provided that the printer type and software version are identical. You can then use identical
transaction setups on two or more printers.
Procedure
1.
In the Settings Editor, click [Transaction printing] -> [Setups].
2.
Click [Export].
3.
Save the file.
4.
To import the setups, click [Import].
5.
Browse to the location where the setup file is stored.
6.
Choose either [Replace] or [Merge].
NOTE
After you imported the setup file you must open and load the transaction setup you want to use.
Exchange All Setups Between Printers
200
Chapter 6 - Carry Out Print Jobs
Canon varioPRINT 135 Series
To Next Page
Loading...
