Canon varioPRINT 110 - Replace the Heat Exchanger Foils

Replace the Heat Exchanger Foils
Before you begin
NOTE
This POC action is available, depending on the type of the heat exchanger foils.
1. On the control panel, touch [System] -> [Maintenance] -> [Start maintenance] -> [Replace the
heat exchanger foils] -> [Start].
2. [Enter the maintenance PIN.]
3. [Touch Next to unlock the door.]
Required tools
Socket wrench
New heat exchanger foils
CAUTION
Only trained personnel is allowed to carry out POC actions.
Illustration
[74] Required tools
Replace the heat exchanger foils
Step Action Illustration
1 [Open the front door.]
4
Replace the Heat Exchanger Foils
384
Chapter 18 - Printer Operation Care (POC)
Canon varioPRINT 135 Series