Canon varioPRINT 110 - Restart the System

Shut Down the System
Illustration
[8] Shut down the system
Procedure
1.
On the control panel, touch [System] -> [Setup] -> [Shut down system].
The control panel displays the message [Are you sure you want to shut down?].
2.
Press [Yes].
A message indicates when the shut down will begin.
When the shut down is complete, the control panel will be off.
3.
To shut down the system completely, switch the On/Off button of each connected finishing unit
into the "O" position.
Shut Down the System
Chapter 3 - Power Information
33
Canon varioPRINT 135 Series