[Original] Settings - [Original type]
Setting Values Description
[Original type] The automatically set value for this setting.
[Portrait left]
• The original has a vertical format (height >
width).
• The binding edge is at the left-hand side.
• When you turn a sheet over the binding edge,
the image or text on the back of the sheet is in
readable form.
[Portrait top]
• The original has a vertical format (height >
width).
• The binding edge of the original is at the top.
• When you turn a sheet over the binding edge,
the image or text on the back of the sheet is in
readable form.
[Landscape left]
• The original has a horizontal format (width >
height).
• The binding edge of the original is at the left-
hand side.
• When you turn a sheet over the binding edge,
the image or text on the back of the sheet is in
readable form.
[Landscape top]
• The original has a horizontal format (width >
height).
• The binding edge of the original is at the top.
• When you turn a sheet over the binding edge,
the image or text on the back side of the sheet is
in readable form.
[Original] Settings - [Size]
Setting Values Description
[Size]
A4, A3, Letter,
Tabloid, etc.
Original in the ADF or on the glass plate:
• Automatic size detection, or
• Enter the media format of the original.
When your original has a non-standard size, you can use
the - and + buttons to enter the exact measures. You can
enter the measures in steps of 1 mm / 0.01". The text of
the[Size] button changes into [Custom].
[Portrait]
[Landscape]
• Automatic orientation detection, or
• Indicate the orientation of nonstandard size media
Description of the Copy Job Settings
220
Chapter 7 - Carry Out Copy Jobs
Canon varioPRINT 135 Series
To Next Page
Loading...
