[Output] Settings - [Print delivery]
Setting Values Description
[Print delivery]
1
[Output loca-
tion]
Select the output location for the job. Depending on the set-
tings for your copy job, the machine automatically suggests
the preferred output location for your job. However, you can
manually overrule this suggestion.
• [Stacker/stapler upper tray]
Deliver the prints at the upper tray of the stacker/stapler.
• [Stacker/stapler lower tray]
Deliver the prints at the lower tray of the stacker/stapler.
• [Stacker/stapler booklet tray]
Deliver the prints at the booklet tray of the stacker/stapler.
• [Folder main tray]
Deliver the folded prints to the tray at the bottom of the
folder.
[Sort]
[By page]
The output is sorted by page.
[By set]
The output is sorted by set.
[Offset stack-
ing]
This setting is only available when the [Offset stacking] set-
ting is set to [Sets (as in job)] in the workflow profile.
[Each set]
Each set delivered to an output location will have a small
shift on top of the previous set. This makes it easier to rec-
ognize individual sets.
[Off]
All the sets or jobs that get to an output location are stacked
in a straight stack.
4
Description of the Copy Job Settings
Chapter 7 - Carry Out Copy Jobs
227
Canon varioPRINT 135 Series
To Next Page
Loading...
