Canon varioPRINT 110 - Page 296

[Binding]
Setting Values Description
[Binding] [None] Here you can define the required number of sta-
ples. Furthermore you can define where you want
the staples with the [Location] option.
The available locations for one staple:
• [Top left]
• [Top right]
• [Bottom left]
• [Bottom right]
The available locations for two staples:
• [Left edge]
• [Top edge]
• [Bottom edge]
• [Right edge]
Check the preview for the result of the selection.
[1 staple]
[2 staples]
[Saddle stitching]
[Folding]
This option is only available when you have a folding unit connected.
Overview of the Available Settings for DocBox Jobs
Chapter 9 - Use the DocBox (Option)
295
Canon varioPRINT 135 Series