A detailed description is given in the sections that follow.
NOTE
X means an adjustment in the feed direction.
Z means an adjustment perpendicular to the feed direction.
9. You can verify the result of the manual registration adjustment on the verification chart.
Touch [Print verification chart] to print the verification chart.
NOTE
• Depending on the media type and the media size, the dots, circles and lines on the
verification chart do not have to match perfectly.
• You can also perform a manual media registration via the Settings Editor. The manual
media registration via the control panel is preferred because you can print the verification
chart immediately after you changed a setting.
Media Registration Quick Start
Chapter 5 - Media Handling
87
Canon varioPRINT 135 Series
To Next Page
Loading...
