Canworld CDE360-2S0R7 - Chapter 6 Parameters Description; Group A0: Monitor

CDE360 Vector Control AC Drive Chapter 6 Parameters Description
-86-
Chapter 6 Parameters Description
Group A0: Monitor
Parameters in A0 group are used to facilitate the user to view the drive state, all of these parameters
are read only, users can’t modify them. When using the keypad to view these parameters, the
keypad will refresh these values.
A0.00
Range: 0.00~b0.00
Default: 0.00
Running
frequency
Unit: Hz
It displays the absolute value of running frequency.
A0.01
Range: 0.00~b0.00
Default: 0.00
Setting
frequency
Unit: Hz
It displays the absolute value of set frequency.
A0.02
Range: 0.0~3000.0
Default: 0.0
DC bus voltage
Unit: V
It displays the drive's bus voltage.
A0.03
Range: 0~1500
Default: 0
Output voltage
Unit: V
It displays the drive's output voltage in the running state.
A0.04
Range: 0.00~655.35
Default: 0.00
Output current
Unit: A
It displays the drive's output current in the running state.
0.01A(drive Power ≤ 55kW)
0.1A(drive Power ≥ 75kW)
A0.05
Range: -300.0~300.0
Default: 0.0
Output torque
Unit: %
It displays the drive's output torque in the running state, the reference item
is rated motor torque.
A0.06
Range: 0.1~2000.0
Default: 0.0
Output power
Unit: kW
It displays the drive's output power in the running state.
A0.07
Range: 0~65535
Default: 0
Motor speed
Unit: RPM
It displays the motor's rotate speed in the running state.