Model 201 Installation & Technical
8400-M117-O1 Rev D
gr l= (Gross Weight Line Print Location)
Press the F3/ key to show the current setting. To accept the
setting displayed, press the F3/ key again to save it. Otherwise,
use the F2/ and F1/ keys to enter a new setting and then press
the F3/ key to save it. Allowable values are: 0 through 132.
gr C= (Gross Weight Column Print Location)
Press the F3/ key to show the current setting. To accept the
setting displayed, press the F3/ key again to save it. Otherwise,
use the F2/ and F1/ keys to enter a new setting and then press
the F3/ key to save it. Allowable values are: 0 through 132.
tr l= (Tare Weight Line Print Location)
Press the F3/ key to show the current setting. To accept the
setting displayed, press the F3/ key again to save it. Otherwise,
use the F2/ and F1/ keys to enter a new setting and then press
the F3/ key to save it. Allowable values are: 0 through 132.
tr C= (Tare Weight Column Print Location)
Press the F3/ key to show the current setting. To accept the
setting displayed, press the F3/ key again to save it. Otherwise,
use the F2/ and F1/ keys to enter a new setting and then press
the F3/ key to save it. Allowable values are: 0 through 132.
nt l= (Net Weight Line Print Location)
Press the F3/ key to show the current setting. To accept the
setting displayed, press the F3/ key again to save it. Otherwise,
use the F2/ and F1/ keys to enter a new setting and then press
the F3/ key to save it. Allowable values are: 0 through 132.
nt C= (Net Weight Column Print Location)
Press the F3/ key to show the current setting. To accept the
setting displayed, press the F3/ key again to save it. Otherwise,
use the F2/ and F1/ keys to enter a new setting and then press
the F3/ key to save it. Allowable values are: 0 through 132.
To Next Page
Loading...
Need help?
General