Model 201 Installation & Technical
8400-M117-O1 Rev D
14. DIAGNOSTICS WEB PAGE
The 201 Diagnostics Web Page is available when SETUP is enabled. When
SETUP is enabled (calibration switch has been pressed), the information and
buttons at the bottom of the screen seen on the next page will be shown.
14.1 Steps to Import
1. Click on the Choose File button and select a 201 settings export file
which should be named “config.201” (if after exporting the settings the
name wasn’t changed).
2. Click on Send
3. The indicator will receive the settings file, validate it and should return
to the Home screen.
14.2 Steps to Export
1. Click on Export, this will start a download of a file “config.201” which
contains the indicator settings in binary encoded format which is NOT
human readable or editable.
14.3 Steps to Reset to Factory Defaults
1. Click on Reset All Settings. This will open a dialog confirmation box.
2. Click on Accept in the dialog confirmation box to return the indicator to
factory defaults.
To Next Page
Loading...