Cardinal 201 User Manual

Model 201 Installation & Technical
8400-M117-O1 Rev D
Page 71
5.8 USB Port
USb
With USb displayed, press the F3/  key. The display will change to enAbl=.
Proceed to the enAbl= (Enable USB Port) parameter.
enaBl= (Enable USB Port)
Press the F3/  key to show the current setting. If the setting displayed is
acceptable, press the F3/  key again to save it. Otherwise, use the
F2/ key to toggle to a new setting and then press the F3/  key to save
it. Allowable settings are:
off
Off (USB port is Disabled)
on
ON (USB port is Enabled)
NOTE: If USb (USB Port) is Enabled (on), the following prompts,
Weight Mode and Print from Port will be active.
 (Weight Mode)
Press the F3/  key to show the current setting. If the setting displayed is
acceptable, press the F3/  key again to save it. Otherwise, use the
F2/ key to toggle to a new setting and then press the F3/  key to save
it. Allowable settings are:

Weight-On-Demand

SMA Output Format

Computer Output Format

Computer Output Format 2

Off (Weight mode is disabled)

Cardinal 201 Specifications

General

Brand	Cardinal
Model	201
Category	Transmitter
Language	English