Cardinal 201 - Page 80

Model 201 Installation & Technical
8400-M117-O1 Rev D
Page 72
 - Weight-On-Demand
If Weight-On-Demand has been selected, the 201 will respond to a
weight request (ENQ).
The host device (computer) sends:
ENQ - (hex 05)
The 201 will respond:
<s><xxxxxx><d><uu><m><cc><cr>
Where:
s =
Sign
"-" = negative
" " (blank) = positive
xxxxxx.xxx =
Weight
Six digits
d =
Decimal point
Added to string if enabled in
setup
uu =
Units
lb, kg, oz, g
m =
Mode
G = Gross, N = Net
cc =
Weight Status
OC = overcap
CZ = center of zero
MO = motion
ee = weight not currently
being displayed
cr =
Carriage Return
(hex 0D)
drnd - Weight-On-Demand (SMA Format)
If Weight-On-Demand has been selected, the 201 will respond to
an SMA weight request.
The host device (computer) sends:
<LF>W<CR>
The 201 will respond:
<lf><s><r><n><m><f><xxxxxx.xxx><uuu><cr>
NOTE: The Weight-On-Demand (SMA Format) is the same as the
SMA Continuous Output Format. Refer to the description
of the data on the next page.