F2/ (Up Arrow): The F2/ key is used for several
functions.
During weight transmitter setup, when a setup
parameter (not a parameter value or setting) is
displayed, pressing the F2/ key will "backup" to
the previous parameter prompt.
Also during setup, when a parameter value or
setting is displayed, pressing the F2/ key will
"toggle" between the different available values or
settings for that parameter.
In normal operation, the F2/ key is used to select
the function it was assigned during the setup of the
Preferences parameter.
For example, if it was assigned the PRINT function,
pressing the F2/ key during a weighing
operation, will add the displayed Gross weight, or
Net weight to the associated accumulator and send
print ticket data to the serial interface selected
during setup.
NOTE! The weight transmitter will not respond to
pressing the F2/ key unless the weight display is
stable.
F3/ (ENTER): The F3/ key is used for several
functions.
During Setup, pressing the F3/ key will display the
current setting of the parameter. Pressing the F3/
key a second time (after changing parameter values
or settings), signals completion of the entry of data
and causes the weight transmitter to process the
data entered.
In normal operation, the F3/ key is used to select
the function it was assigned during the setup of the
Preferences parameter.
For example, it could be assigned to function as
the UNITS or PRINT key or could be disabled and
not used.
To Next Page
Loading...
Need help?
General