8545-M838-O1 Rev D 825 Installation & Technical
TICKET SETTINGS, CONT.
Port:
With the configure ticket screen displayed, the current setting for the Port: parameter
will be shown. If the setting displayed is acceptable, press the ENTER key to return to
the previous screen.
Otherwise, press the SPACE key to step through and select the port to use for the
standard ticket and then press the ENTER key to save the new setting and return to the
previous screen. Available ports are:
If Custom is selected, an additional parameter (below the Port:) will be shown.
Custom:
With the configure ticket screen displayed and Custom selected for the Port: parameter,
the current setting for Custom: will be shown. If the setting displayed is acceptable,
press the ENTER key to return to the previous screen.
Otherwise, use the alphanumeric keys to enter the port name to use and then press the
ENTER key to save the new setting and return to the previous screen.
Ticket:
With the Ticket Coordinates screen displayed, the current setting for the Ticket:
parameter will be shown. If the setting displayed is acceptable, press the ENTER key to
return to the previous screen.
Otherwise, press the SPACE key to step through and select the ticket to use and then
press the ENTER key to save the new setting and return to the previous screen.
Available tickets are:
If Default is selected, the display will change to the Configure tabs page 1
screen. This is the screen to input the Print Tabs Settings.
To Next Page
Loading...
