Cardinal 825 - Electronic Talley Roll (ETR) File; Accessing the ETR File

8545-M838-O1 Rev D  825 Installation & Technical
132
ELECTRONIC TALLEY ROLL (ETR) FILE
The 825 is equipped with an Electronic Talley Roll (ETR) file, which stores transaction data
each time the indicator receives a Talley command from the computing peripheral. The data is
maintained in non-volatile memory for viewing by a weights and measures inspector.
Each time the indicator receives an ETR request (SMA XT command), an internal consecutive
transaction number (that cannot be modified), the date, time, and the current weight will be
stored in memory. The 825 has memory capacity to store up to 7000 transactions in the ETR
file. Note that when its capacity is reached, the newest transaction will replace the oldest.
To View the Electronic Talley Roll (ETR) File
1. Press the ON/OFF key to apply power to the 825. The display will perform a short self-
test and then change to the Startup screen showing the software versions and
diagnostics of the option cards.
2. When the 825 is initially started, a countdown staring at 7 seconds will appear to the
right of 1. Application Program. Allow the countdown to complete or press the
ENTER key or press the 1 key to select the Application Program option. The
display will change to show:
Starting application mode
and then change to show:
Loading...
Starting...
and then change to show the Application Menu with the countdown seconds
appearing to the right of the last menu selection.
Application Menu OS Version 1.12.009
IP: 127.0.0.1
Truck / ID
Storage
By Cardinal
Check
Weigher
By Cardinal
Multi
Scale
By Cardinal
DFC
Batcher
By Cardinal
Highway
Weigh Station
By Cardinal
Multi
Scale (EIP)
By Cardinal
Next >>