8545-M838-O1 Rev D 825 Installation & Technical
TICKET SETTINGS, CONT.
Configure tabs page 6
With the Configure tabs page 5 screen displayed, press the ENTER key to advance to the
Configure tabs page 6 screen.
If the setting displayed for each label is acceptable, press the ENTER key to advance to the
Configure tabs page 6 screen or press the press the Left Arrow to return to the
previous screen.
Otherwise, use the alphanumeric keys to enter the description (up to 35 characters) for the
first line of the footer and then press the Down Arrow to advance to the next line. Note
that pressing the UP Arrow key will “backup” to the previous line.
Continue using the alphanumeric keys to enter the description for each line of the Footer,
pressing the Down Arrow key to advance to the next line.
Press the Down Arrow to advance to the next parameter.
NOTE: Use the UP Arrow key to “backup” to the previous coordinate or parameter.
When the description for all lines of the Header and Footer have been entered, press the
ENTER key to save the new settings and return to the Configure Ticket screen.
To Next Page
Loading...
