8545-M838-O1 Rev D 825 Installation & Technical
ANNUNCIATORS
The annunciators are displayed on the Weight screen to show that the 825 is in the mode
corresponding to the annunciator label or that the status indicated by the label is active.
CENTER ZERO
This is shown on the Weight screen to indicate that the displayed (zero) weight is within +/- 1/4
division of the center of zero.
GROSS
This is shown on the Weight screen to indicate that the 825 is in the Gross weight mode.
NET
This is shown on the Weight screen when the 825 is in the Net weight mode. Note that the
screen will display the Gross, Tare and Net weights.
TARE
This is shown on the Weight screen to indicate that a Tare weight has been stored. Note that
the Gross and Net weights will be displayed also.
tn
This is displayed on the Weight screen to show that the weight units are avoirdupois tons.
lb
This is displayed on the Weight screen to show that the weight unit is pounds.
t
This is displayed on the Weight screen to show that the weight units are tonnes (metric tons).
kg
This is displayed on the Weight screen to show that the weight units are kilograms.
To Next Page
Loading...
