Cardinal 825 - Configure Application Menu; Enabling or Disabling Menu Items

8545-M838-O1 Rev D  825 Installation & Technical
110
CONFIGURE APPLICATION MENU
With the Application Menu displayed, press the U key or use the Navigation Keys to select
(highlight) Configuration and then press the ENTER key. The display will change to show
the Configuration screen.
Configure Menu
With the Configuration screen displayed, press the M key or use the Navigation Keys to
select (highlight) Configure Menu and then press the ENTER key. The display will
change to show the Configure Application Menu screen.
1. Enable/Disable menu items
With the Configure Application Menu displayed, press the 1 key or use the Navigation Keys
to select (highlight) 1. Enable/Disable menu items and then press the ENTER key.
The display will change to show the Configure Menu screen.
Application:
With the Configure Menu screen displayed, the current setting for the Application:
parameter will be shown. If the setting displayed is acceptable, press the  Down Arrow
to proceed to the next parameter.
Otherwise, press the SPACE key to step through and select the applications to be shown
on the Application Menu screen and then press the  Down Arrow to advance to the
next parameter or press the ENTER key to save the new setting and return to the
previous screen. Available applications are:
All
None
Truck / ID Storage
DFC Batcher
Checkweigher
Highway Weigh Station
Multi Scale
Multi Scale (EIP)
Configure Application Menu
1. Enable/Disable menu items
2. Configure custom menu items