Cardinal 825 - Certifications and ID Information; Viewing Certifications and ID Data

8545-M838-O1 Rev D  825 Installation & Technical
130
CERTIFICATIONS / ID INFORMATION
To View the Certifications / ID Information
1. Press the ON/OFF key to turn on the 825. A self-test will be performed showing the
software versions and status of the option cards and then display the Startup screen.
2. Press the Navigation Keys  Down Arrow to “advance” to (highlight) the Legal
metrology information / Setup option and then press the ENTER key or press the
3 key to select the Legal metrology information / Setup option. The display will
change to show the Legal metrology information / Setup screen.
3. With the Legal metrology information / Setup displayed, press the 2 key to select View
certifications / ID information or press the  Down Arrow and then the
ENTER key to select View certifications / ID information. The display will
change to show the Certifications / ID Information screen.