Cardinal 825 - System Configuration; Initiating System Configuration

8545-M838-O1 Rev D  825 Installation & Technical
89
CONFIGURATION
Configuration is used to: Calibrate the touch screen, Show the touch screen tracking (a target,
the “” sign will appear where the screen is touched), Set the color settings, Configure the
weight server (the TCP/IP server, the serial ports and to view the Electronic Talley Roll),
configure Ticket Settings and Configure the application menu.
To Begin Configuration
1. Press the ON/OFF key to apply power to the 825. The display will perform a short self-
test and then change to the Startup screen showing the software versions and
diagnostics of the option cards.
2. When the 825 is initially started, a countdown staring at 7 seconds will appear to the
right of 1. Application Program. Allow the countdown to complete or press the
ENTER key or press the 1 key to select the Application Program option. The
display will change to show:
Starting application mode
and then change to show:
Cardinal 825-loading...
Starting...
and then change to show the Application Menu.
With the Application Menu displayed, press the Next >> key or use the Navigation Keys to
select (highlight) Next >> and then press the ENTER key. The display will change to show
the Application Menu screen for the additional applications.
Application Menu OS Version 1.12.009
IP: 127.0.0.1
Truck / ID
Storage
By Cardinal
Check
Weigher
By Cardinal
Multi
Scale
By Cardinal
DFC
Batcher
By Cardinal
Highway
Weigh Station
By Cardinal
Multi
Scale (EIP)
By Cardinal
Next >>