8545-M838-O1 Rev D 825 Installation & Technical
OPERATORS, CONT.
4. Delete Operator
The Delete Operator screen allows you to delete (remove) an operator login and all
previously configured settings for that login.
1. With the Setup Operators screen displayed, press the 4 key or use the Navigation Keys
to select (highlight) 4. Delete Operator and then press the ENTER key. The
display will change to show the Delete Operator screen and prompt for the operator
login (name).
2. Enter the operator login and then press the ENTER key.
3. The display will change to show
Are you sure?
4. To delete the login, press the Y key (for Yes) and then press the ENTER key.
5. The display will change to show the Setup Operators screen. All settings for that
operator login have been deleted.
6. Otherwise, press the N key (for No) and then press the ENTER key to return to the
Setup Operators screen.
To Next Page
Loading...
