8545-M838-O1 Rev D 825 Installation & Technical
SETUP AND CALIBRATION, CONT.
Totalizer Function
The Totalizer function will sum the weights of two or more scales and make the total available
to the application program. The Totalizer can be referenced as if it were another scale.
T. Total
With the Setup Scale Number screen displayed, press the T key or use the Navigation Keys
to select (highlight) T. Total and then press the ENTER key. The display will change to
show the Setup Scales for Totalize screen.
Scale Include Capacity
With the Setup Scales for Totalize screen displayed, the current setting for each Scale will
be shown. If the setting displayed is acceptable, press the ENTER key to proceed to the
next screen or the Navigation Keys Left Arrow to return to the previous screen.
Otherwise, press the SPACE key to Include the first scale (toggle from NO to YES) and
then press the Right Arrow to advance to the Capacity setting. Use the numeric keys
to enter the scale capacity and then press the Down Arrow to proceed to the next scale.
Repeat the above steps for each scale to be included in the Totalize and then press the
ENTER key to save the new settings and proceed to the next parameter .
To Next Page
Loading...
