8545-M838-O1 Rev D 825 Installation & Technical
KEYPAD FUNCTIONS, CONT.
Touch Screen Keys
This section describes the Touch Screen keys along with their functions as programmed by the
825 Application program menu selection. Refer to Figure No. 21 below or the actual
indicator touch screen while reading this section.
Figure No. 21
Operator
Pressing this key will prompt for the input of a new operator.
1. The display will change to show the Login screen.
2. Enter the login and then press the Down Arrow to advance to the password prompt.
3. Enter the password and then press the ENTER key to proceed.
4. Otherwise, press the ESC key to return to the Weight screen.
Scale
Pressing this key (with multiple scales) will toggle through the available scales and, if
enabled, the totalizer. Note that pressing this key with only one scale, the screen will
display the message Only one scale.
Date/Time
Pressing this key allows the operator to change the date and time. For information on
changing the date and time, refer to the Setting Date and Time section of this manual.
MENU
Pressing this key allows viewing or clearing the accumulators. For information on viewing or
clearing the accumulators, refer to the Accumulators section of this manual.
To Next Page
Loading...
