8545-M838-O1 Rev D 825 Installation & Technical
KEYPAD FUNCTIONS, CONT.
Standard Indicator Keys, Cont.
UNITS
Pressing the U key will change the weighing units to the alternate units if available. For
example, with lb (pounds) showing, pressing this key will change the weight units to kg
(kilograms). IMPORTANT! This feature must be enabled during setup and calibration (see
the Base Units and Conv Units parameters).
PRINT
Pressing the P key will initiate the transmission of weight data to the ticket printer. If
displaying Gross weight, the time, date and gross weight are printed. If displaying net
weight, the time, date, gross, tare and net weights are printed. IMPORTANT! If the weight
is less than zero (negative weight), pressing this key will momentarily display the message:
Cannot print BELOW ZERO –
The display will return to the Weight screen, showing gross weight only. Also, if the weight
is unstable (motion on the scale), pressing this key will momentarily display the message:
Cannot print MOTION –
The display will return to the Weight screen, showing gross weight only
To Next Page
Loading...
