8545-M838-O1 Rev D 825 Installation & Technical
PREFERENCES
1. Press the ON/OFF key to turn on the 825. The display will perform a short self-test and
then change to the Startup screen showing the software versions and status of the option
cards.
2. Press the Navigation Keys Down Arrow to “advance” to (highlight) the Legal
metrology information / Setup menu option and then press the ENTER key or
press the 3 key to select the Legal metrology information / Setup option. The
display will change to show the Legal metrology information / Setup screen.
NOTE: If the Login and Password protection feature has been enable, the
Login screen will be displayed instead of the Legal metrology
information / Setup screen. Enter the login and then press the Down
Arrow to advance to the password prompt. Enter the password and then press
the ENTER key to proceed to the Legal metrology information / Setup.
3. From the Legal metrology information / Setup screen, press the 3 key or use the Navigation
Keys to select (highlight) 3. Setup menu and then press the ENTER key.
4. With the Setup Menu displayed, press the 5 key or use the Navigation Keys to select
(highlight) 5. Preferences and then press the ENTER key. The display will change to
show the Preferences Menu screen.
1. Date/Time
With the Preferences Menu displayed, press the 1 key or use the Navigation Keys to select
(highlight) 1. Date/Time and then press the ENTER key. The display will change to
show the Setup Preferences screen for the Date and Time.
To Next Page
Loading...
