Cardinal 825 - 20 mA Terminal Connections

8545-M838-O1 Rev D  825 Installation & Technical
18
INSTALLATION, CONT.
20mA Terminal Connections
Refer to the table and Figures No. 12 and 13 below to connect each wire to the terminal block.
20mA COM2 – TERMINAL P21
IMPORTANT!
 COM2 requires J7 shunt installed on 20mA.
 825 Active requires J3 installed.
 825 Passive requires J3 removed.
Terminal
Function
1
TXA (Transmit A)
2
TXB (Transmit B)
3
RXA (Receive A)
4
RXB (Receive B)
5
GND (Ground)
Figure No. 12
Figure No. 13