Cardinal 825 - Weight Server Configuration; Configuring TCP;IP Server

8545-M838-O1 Rev D  825 Installation & Technical
95
CONFIGURATION, CONT.
Configure Weight Server
With the Configuration screen displayed, press the W key or use the Navigation Keys to
select (highlight) Configure Weight Server and then press the ENTER key. The
display will change to show the Configure Weight Server screen.
1. Configure TCP/IP Server
With the Configure Weight Server screen displayed, press the 1 key or use the Navigation
Keys to select (highlight) 1. Configure TCP/IP Server and then press the ENTER
key. The display will change to show the Select TCP/IP Server screen.
Configure Weight Server
1. Configure TCP/IP Server
2. Configure Serial Ports
3. Electronic Talley Roll
Select TCP/IP Server
Num Sc Type Port
1. 0 Custom 1100
2. 1 On Demand 1101
** Add Server **